|
|
|
|
|
|
|
|
|
|
||||
|
|
|||||
|
|
|
|
|
|
|
|
|
|||||
 |
|
Download PDF pages from the Product Catalog or detailed Installation Instructions under each product. (You will need Adobe Acrobat to view these files. To download a free copy, link to: www.adobe.com NOTE: All dimensions listed are approximate. For precise dimensions, download catalog pages or installation instructions. |
|||||||
| INT-03 Series | INT-04 Series | ||||||||
 |
This force-guided and FailSafe relay is 55mm wide and handles all monitoring needs. Use it with any of Sentrol Industrial’s Series 300-BT switches to meet all CE Standards. 2-1/8"(L) x 3"(H) x 4-1/2"(D) INT Monitor Relay "Integrity Series" |
 |
This FailSafe, emergency stop relay
is used with safety mats and E-Stop buttons where a force-guided relay is
required.
2-1/8"(L) x 3"(H) x 4-1/2"(D) Emergency-Stop Safety Relay |
||||||
|
INT-04
Safety Monitor Relay (PDF 96K) |
|||||||||
|
INT-03
Safety Monitor Relay (PDF 96K)
|
|||||||||
| INT-05 Series | INT-06 Series | ||||||||
 |
The INT-05 is an expansion relay
to be used with the INT-03 and INT-04. It adds three more safe outputs.
2-1/8"(L) x 3"(H) x 4-1/2"(D) Safety Expansion Relay |
 |
The INT-06 is also an
expansion relay with a time-delay feature (1-25 seconds) to allow for controlled
stops for high inertia loads.
2-1/8"(L) x 3"(H) x 5-1/8"(D) Safety Expansion Relay with Time Delay Opening |
||||||
| INT-05
Safety Monitor Relay (PDF 96K) INT-05 Safety Monitor Installation Instructions (PDF 136K) |
|||||||||
|
INT-06
Safety Monitor Relay (PDF 96K)
|
|||||||||
| INT-22.5R1-024 Series | Junction Board (Safety Relays) | ||||||||
 |
This CE compliant safety monitoring
relay‘s 22.5mm width makes it a space saver. It is ideal where limited
space is available such as in a machine control enclosure.
1"(L) x 4.5"(H) x 4"(D) GuardSwitch™ Safety Monitor Relay |
 |
The JB-0300 is a junction board accessory to all the INT Series relays. It acts as a hub for the relay and allows you to wire two to five switches to the board with a single wire connection to the relay. | ||||||
| JB-0300 Junction Board Installation Instructions (PDF 64K) | |||||||||
 |
|
|
|
|
|
|
|
|
|
