|
|
|
|
|
|
|
|
|
|
||||
|
|
|||||
|
|
|
|
|
|
|
|
|
|||||
 |
|
PIONEERS IN POSITION SENSORS GE Security Industrial has been a pioneer in the use of multiple reeds and “wide gapping” in our position sensors. We continue to lead the way in finding new and innovative solutions to problems that vex the industry. QUALITY REPUTATION Designed to make installation easier, GE Security Industrial position sensors have earned their reputation for quality. They are built for durability and dependability. Most are conservatively rated at 100,000 cycles under full load, and 10,000,000 cycles under dry circuit. Every reed connection is hand soldered and the reeds in all models are environmentally sealed. Like the GuardSwitch™ safety interlock switches, our position sensors are tested before they leave the factory — 100% of the time. Our world-class manufacturing standards and attention to detail virtually eliminate all out-of-box failures. You can install GE Security Industrial position sensors quickly and with every confidence in their reliability. Download PDF pages from the Product Catalog or detailed Installation Instructions under each product. (You will need Adobe Acrobat to view these files. To download a free copy, link to: www.adobe.com NOTE: All dimensions listed are approximate. For precise dimensions, download catalog pages or installation instructions.
|
|||||||
| 1032 Series | 1035 Series | ||||||||
 |
The 1032 series is a
low voltage position sensor with small housing ideal as a door-open indicator.
1-1/2"(L) x 3/4"(H) x 1/4"(D) ABS Plastic Enclosure |
 |
The 1035 is similar to the 1032 series, but conveniently mounts with self-adhesive tape. 1-1/2"(L) x 3/8"(H) x 1/4"(D) ABS Plastic Enclosure |
||||||
| 1035 Series – Miniature Self-Adhesive With Wire Leads (PDF 128K) | |||||||||
| 1032 Series – Miniature Flange Mount With Wire Leads (PDF 128K) | |||||||||
| 1045 Series | 1045T Series | ||||||||
 |
The 1045 series is a low voltage
position sensor with narrow housing ideal for overhead doors. This sensor
also has a large gap of 2.4".
3-1/2"(L) x 1/2"(H) x 5/8"(D) ABS Plastic Enclosure |
 |
The 1045T series is
a low voltage position sensor with a terminal connection ideal for easy
installation or switch replacement. Similar to the 1045, the 1045T has a
narrow housing and a large gap of 2.4".
3-1/2"(L) x 1/2"(H) x 5/8"(D) ABS Plastic Enclosure |
||||||
| 1045 Series –Surface Mount With Wire Leads (PDF 128K) | |||||||||
| 1055 Series | 1072 Series | ||||||||
 |
The 1055 series is a
small, low voltage recessed switch with a bare magnet. It is often used
in places where the switch must be concealed such as in an ice making machine.
1-1/4"(L) x 1/4"(dia.) ABS Plastic Enclosure |
 |
The 1072 series is a low voltage
recessed position sensor that is ideal for ambulances and service vehicles
as door open indicators.
1-3/8"(L) x 3/8"(dia.) ABS Plastic Enclosure |
||||||
| 1072 Series – 3/8" Diameter Flanged With Wire Leads (PDF 160K) | |||||||||
|
1055 Series – 1/4" Diameter Switch With Wire Leads (PDF 128K) |
|||||||||
| 1075 Series | 1078 Series | ||||||||
 |
The 1075 series is a low voltage
recessed position sensor often used as a security device and for pre-installed
automatic doors.
1-3/8"(L) x 3/8"(dia.) ABS Plastic Enclosure |
 |
The 1078 is a low voltage
recessed position sensor often used in steel door applications because of
its unique collar design that breaks the steel door’s magnetic field
and does not interfere with the switch’s make/break gap. It has a 1"
diameter and is easy to install.
1-1/2"(L) x 1"(dia.) ABS Plastic Enclosure |
||||||
| 1075 Series – 3/8" Diameter Press Fit With Wire Leads (PDF 160K) | |||||||||
| 1078 Series – 1" Diameter Steel Door With Wire Leads (PDF 160K) | |||||||||
| 1078C Series | 1082 Series | ||||||||
 |
The 1078C is the same as the 1078, but with a 3/4" diameter. 1-1/2"(L) x 3/4"(dia.) ABS Plastic Enclosure |
 |
The 1082 is an economical low voltage
position sensor.
2-1/2"(L) x 1/2"(H) x 1/2"(D) ABS Plastic Enclosure |
||||||
| 1085 Series | 1085T Series | ||||||||
 |
The 1085 is a low voltage
position sensor often used for gaming machines and equipment as a door-open
indicating sensor.
2"(L) x 3/8"(H) x 3/8"(D) ABS Plastic Enclosure |
 |
The 1085T is the same as the 1085, but with a terminal connection easily installed and ideal for replacing old switches. 2-1/2"(L) x 5/8"(H) x 3/4"(D) ABS Plastic Enclosure |
||||||
| 1085T Series – Screw Terminal (PDF 160K) | |||||||||
| 1085 Series – Screw Mount With Wire Leads (PDF 160K) | |||||||||
| 1135T Series | 1172 Series | ||||||||
 |
The 1035T is a low voltage position sensor similar to the 1085T, but has a smaller housing and is very compact. 1-1/2"(L) x 5/8"(H) x 1/2"(D) ABS Plastic Enclosure |
 |
The 1172 is a low voltage position sensor with a 3/8" diameter housing and oval flange. It is easily recessed and often used in ambulance doors and cabinets to turn on indicator lights. 1-1/4"(L) x 3/8"(dia.) ABS Plastic Enclosure |
||||||
| 1135T Series – Miniature With Screw Terminals (PDF 128K) | |||||||||
| 1172 Series – 3/8" Diameter Press Fit/Flange Mount (PDF 160K) | |||||||||
| 2100 Series | 2200 Series | ||||||||
 |
The 2100 is a low voltage
position sensor that secures almost any loose item. It is often used for
boats, trailers and other heavy equipment. It has durable, heavy gauge construction
for long life.
3-3/8"(L) x 1-5/8"(H) x 3/4"(D) ABS Plastic Enclosure |
 |
The 2200 is a low voltage position
sensor often used for overhead doors because of its low-profile design and
large gap of 2.4".
3-1/2"(L) x 1-1/2"(H) x 1-1/2"(D) Aluminum Enclosure |
||||||
| 2200 Series – Miniature Surface Mounts With Armored Cable (PDF 128K) | |||||||||
|
2100
Series – Magnapull™ Heavy Duty Magnetic Pull-Apart Cords |
|||||||||
| 2300 Series | 2500 Series | ||||||||
 |
The 2300 is a low voltage position
sensor designed to be mounted on 2” or 3” overhead door channels.
Installation is simple and quick.
3 1/4"(L) x 2 1/2"(H) x 1 3/4"(D) Extruded Aluminum Enclosure |
 |
The 2500 is a low voltage position
sensor with strong housing. It is used for rapid transit trains, gates and
garage doors.
3"(L) x 1"(H) x 1/2"(D) Anodized Aluminum Enclosure with ABS plastic end caps |
||||||
| 2300 Series – Panel Door Magnetic Contact (PDF 80K) | 2500 Series – Aluminum Housing Armored Cable Wide Gap (PDF 128K) | ||||||||
| 2700 Series | 2800T Series | ||||||||
 |
The 2700 is a low voltage position
sensor with a small sense range. It is best used when a highly defeat resistant
sensor is needed.
4-1/4"(L) x 1-1/2"(H) x 3/4"(D) Anodized Aluminum Enclosure |
 |
The 2800T is a low voltage
position sensor made for explosive environments. It is UL listed for hazardous
location classes: Class I Group C,D, Class II Group E, F & G, and Class
I Group B housing available.
5-3/4"(L) x 2"(H) x 1-1/2"(D) UL Explosion Proof, Die Cast Aluminum Enclosure |
||||||
| 2700 Series – Anodized Alloy Housing With Armor Cable (PDF 160K) | |||||||||
| 3008 Series | 3010 Series | ||||||||
 |
The 3008 is a low voltage
roller plunger position sensor ideal for door applications. The 3008 has
a short body and vertical flange for a narrow door frame. The 3002, 3003,
and 3004 has a longer body and a horizontal flange for standard door frames.
The 3005, 3006, and 3007 also has a longer body, but a vertical flange.
1-3/4"(L) x 3/4"(dia.) ABS Plastic Enclosure |
 |
The 3010 is a low voltage position
sensor with an adjustable screw on the plunger. This switch is often used
on panel doors and is available as a recessed plunger switch, a clip mount
plunger, and a tamper switch.
1-5/8"(L) x 1/2"(dia.) ABS Plastic Enclosure |
||||||
|
3008 Series – Recessed Roller Plunger With Wire Leads (PDF 160K) |
|||||||||
 |
|
|
|
|
|
|
|
|
|
